Scientific Equipment and Scientific Instrument

• Portable
• Efficient
• Automatic calibration

• Wcm Conductivity Meters Includes Measurement Of Conductivity Temperature In Liquids
• Automatic Calibration:

• Conductivity Auto-Ranging: WCM Series Have Auto-Range Function For Measuring Conductivity. Upon Immersing Conductivity Sensor Into Sample Solution, The Screen Immediately Displays The Value In Appropriate Measurement Range For Accuracy.
• Automatic Temperature Compensation: Using The Supplied Temperature Probe, The Temperature Value Is Displayed On The Screen. The Meter Automatically Compensates For Optimum Accuracy Under Variable Temperature Conditions
• Adjustable Temperature Coefficient And Cell Constant: Various Ions May Have Different Temperature Coefficients. The Meters Can Set The Temperature Coefficient Between 0 And 3.9% In Degrees Centigrade For Optimum Accuracy, Set Three Cell Constants(O.1,1 And 10) For Measuring Requirements

Portable Conductivity Meter offered comes designed and developed in different configuration options so as to perfectly match up with the specific working demands of the customers.

Further, these conductivity meters also provide for portable usage and come with large LCD display for allowing convenient measuring of conductivity, liquid resistivity, TDS and salinity properties.

Some of its features include allows for automatic probe calibration; coming equipped with automatic recognition module; support accurate calculation of maximum, minimum values.

• Microprocessor Control
• The WMS-300 and WMS-400 hot plate magnetic stirrer is operated by a digital control CPU.
• Digital Speed Control
• Stirring speed is also controlled by the CPU from the keypad while the stirring speed is indicated on the large display
• Operator can setup the objective temperature, hold temperature, stirring time and speed
• Automatic Temperature Control
• Connect the temperature probe and place into glass container being stirred to measure and maintain the object temperature.

	3 different size lce cubes
	large, Medium and Small(Selectable)
	Add water - indicator & Power lndicator
	"Lce Full" indicator
	CFC free compressor
	Ice Basket & Scoop for easy ice cube removal
	Noiseless operation
	Automatic run and easy to use.
	Compact Design and Low maintenance
	Application:
	Hospitals,Educational Research Institues and Bio technology Laboratories

Product description:

• Continuous Self Tuning Circuitry For Any
• change In Workload, Liquid Level And Bath Temperature
• Uniform Cavitations Throughout The Tank
• Separate Oscillator Eliminates Damage To
• Generator In Case of Failure Of Transducers
• Using 40 Khz Frequency For Effective Cleaning With Low Noise
• Designed For Complete Cleaning Of Small
• and Large Components Without Dismantling
• Inner tank and Outer body made of Stainless Steel

• Dental Clinic
• Opthalmology
• Pharmaceutical
• Surgical
• Jewelery
• Electroplating
• Electronics
• Machine Tools
• Automobile
• Watch Industry

• Continuous Self Tuning Circuitry For Any
• change In Workload, Liquid Level And Bath Temperature
• Uniform Cavitations Throughout The Tank
• Separate Oscillator Eliminates Damage To
• Generator In Case of Failure Of Transducers
• Using 40 Khz Frequency For Effective Cleaning With Low Noise
• Designed For Complete Cleaning Of Small
• and Large Components Without Dismantling
• Inner tank and Outer body made of Stainless Steel

• Dental Clinic
• Ophthalmology
• Pharmaceutical
• Surgical
• Jewellery
• Electroplating
• Electronics
• Machine Tools
• Automobile
• Watch Industry

• Dust
• Dirt
• Rust
• Greece
• Wax
• Flux
• Finger Prints

	Touch screen colour display
	Temperature display
	Faraday magneto-optical modulator
	Polarizer Polarizing film
	Digital Polarimeter based on Optical null principle
	No warm-up time is required when instrument is switched on
	Measuring multiple scales - specific rotation, optical rotation, sugar degree and concentration
	Automatic repetition-measurement for 6 times, and calculation of average value.
	Measurement of dark-coloured sample
	Response time 3°/sec.
	Insulated Sample chamber to keep sample temp. constant
	User can set retesting sample between 1 to 6
	Photodiode Detector
	Data display - date, time, measuring mode, length of tube, temp. test time, measured value (1 - 6 values), average value,
	Purity method - saccharic concentration

	Sound Proof Enclosure to reduce cavitational sound ( Includes )
	Microprocessor controlled and completely programmable.
	Digital LCD display with Time setting .
	Temperature Indicator and controller.
	Auto-tuning for convenience and optimal processing efficiency.
	Variable Power Output control.
	Auto frequency chasing.
	Output amplitude 0-100% adjustment.
	Can be used to smash animal and plant cells

•  

  	INTRODUCTION  The concentration of Ions and gases in solution may be determined using ion selective electrodes. When a suitable sensing electrode is immersed in a solution containing ions or gases, an electrical potential may develop at the electrode surface due to a selective spontaneous reaction. The magnitude of this potential varies with the concentration of the selected ion or gas
  	ISEs are responsive to concentration of particular ions in the test liquid and are variable-potential electrodes.
  	When measurements are made using an ion meter, by calibrating with various standard solutions, direct readings of the concentration of the ion can be taken.
  	Slope of the electrode depends on the temperature therfore measurements must be taken at a fixed temperature.
  	SOLID STATE ELECTRODES are as combination electrodes complete with reference electrode. These electrodes incorporate a solid sensing surface made of compressed silver halides, or solid crystalline material.
  	A solid state electrode develops a voltage due to ion-exchange occurring between the sample and the inorganic membrane. An equilibrium mechanism occurs due to the very limited solubility of the membrane material in the sample.
  	GAS SENSORS are combination electrodes that detect dissolved gases in a solution. No external reference is required for these electrodes. The sensing element is separated from the sample solution by a gas permeable membrane
  	A gas sensor works due to the partial pressure of the measured gas in solution. The dissolved gas in the sample diffuses into the membrane and changes the pH in a thin film of unbuffered electrolyte on the surface of the internal pH sensor. Diffusion continues until the partial pressure of the sample and the thin film is the same. The pH change is proportional to the dissolved gas in the sample
  	STORAGE AND CLEANING It is sufficient to store the electrode in a standard solution during short measuring intervals. In order not to strain the membrane unnecessary, the electrode should be stored dry if it is not used for several days. After the dry storage put into standard solution for 3 - 4 hours for new measurements. Contaminations should be removed with a wet paper towel, don’t use organic solvents like acetone.
  	No Reference electrode needed Solid state sensors Refillable Type Our ISEs are compatible with other make Ion / pH meter Direct measurement of Ionic concentration Standard supply with ISAB & Calibration Solutions Refillable Type Virtually unbreakable Fast response no maintenance No membranes or replacement module

Ion Selective ElectrodesSalient Features

	Advanced technologies, WINDOWS operating system.
	Automatic restart after power failure.
	Each thermal block has 4 independent temperature control sensors and 8 peltier heating units to ensure accurate and uniform temperature across block surface, and provide users with replicating previous condition set-up.
	8" TFT color touch-screen with graphical display provides easy use for setting up and monitoring set parameter.
	The actual and target temperatures can be viewed and displayed graphically in real time.
	Built-in 11 standard program file template, can quickly edit the required files.
	Internal flash memory for 10000 typical PCR files in free configurable folders.
	Compatible with mouse, keyboard, capable to transfer data and perform software updates via USB Drive.
	Applicable with the following 0.2m1 tube models: non-skirted, semi and fully skirted plated.
	Replaceable module, dual-block module can simultaneously run two different PCR programs.

• Big Ultra Bright Backlight LCD Display
• Direct Reading On Display
• Auto Range Function
• Temperature Display
• Printer & Computer Interface
• Data Logger Software (Optional)Not Applicable In WDV- 8

• Data Displayed
• Selected Speed
• Selected Spindle
• Viscosity Reading
• Torque Percentage
• Temperature

• Automatic measurement
• Accurate
• Reliable performance

• Automatic Measurement: WDAP-60 built-in auto-controlling system. Power on the polarimeter, the system will search for zero point automatically. You need only put the sample tube in measuring field chamber, the polarimeter will display the angle of rotation
• Auto-Judge Substance Form Levorotatory Or Dextrorotatory: The polarimeter can auto-judge compoundor form levorotatory or dextrorotatory. If there is negative measures value, that means is levorotatory substance, if appearing positive measures value, it means is dextrotatory substance
• Reproducibility: In experiment, you need test a sample solution three times or more to ensure the accuracy of the measured value.

Listed among the topmost companies, we offer Portable PH Meter to the clientele. This range of product is designed by professional’s designing team as per the specific requirements and demands of our clients.

In addition to this, our products undergo various tests under the supervision of quality controllers to ensure its superior quality.

Moreover, our clients can avail this Portable PH Meter from us at industrial leading rates.

Features:

• Long lasting life
• Quality product
• Flawlessly finish

• One or Two points calibration (100% in air, 0% in zero oxygen solution)
• Automatic temperature compensation for best accuracy under fluctuating temperatures
• Automatically compensates salinity and barometric pressure after manual input for increased accuracy
• Automatic message prompts help your easy to operate meter
• Expanded memory stores and recalls up to 99 data sets
• USB Communication interface can be sent data to computer

• DO Probe, Membrane Cap, Electrolyte Solution, Power Adapters

• The innovative optical layout and state of art mono- chromator with high grade blazed holographic grating ensure accuracy. Its integrated design assures long term stability and durability
• The two detectors are used to measure sample and reference respectively and simultaneously for optimizing measurement accuracy
• Lamp Selection enables conserving the life of D2 & Tungsten lamps

• Visible Spectrophotometer
• Can save and display 50 groups of data
• 5 groups per screen
• Data can be restored after a sudden power cut
• Auto setting wavelength
• Tungsten lamp & deuterium lamp can be turned on/off individually to extend lifetime
• Automatic wavelength calibration and dark current getting